Skip to content

ADBL Compounds

10 products

Showing 10 of 10

ADBL Compounds · Help

Frequently asked questions

The questions we get asked the most about ADBL Compounds.

Visit help centre
What is the difference between a compound and a polish?

A compound has a stronger abrasive cut to remove deeper scratches, swirl marks, oxidation and sanding marks, but can leave a slight haze. A polish has a finer cut that removes light marks and haze and brings out gloss and clarity. Most multi step correction uses a compound first, then a polish, then a finishing polish if needed.

Which ADBL compound should I start with?

Always start with the least aggressive combination that removes the defects. Test a small section with a polish such as ADBL Polish Pro on a polishing pad. If the marks remain, step up to Cut Pro or Hard Cut on a cutting pad, then refine with Polish Pro or Finish Pro. For deep sanding marks from P1000 grit, start with Cut Pro, One Cut Pro or Hard Cut.

What is ADBL One Cut Pro?

ADBL One Cut Pro is a one step cut and polish compound from the ADBL Pro Line. It uses diminishing abrasives that break down as you work, so it removes heavy defects, including P1000 sanding marks, deep scratches and oxidation, then refines the finish to high gloss without a separate polish. It suits detailers who want strong correction in less time.

When should I use an all in one polish?

An all in one, such as ADBL AIO Soft or AIO Hard, cleans, lightly polishes and protects in a single step. It suits cars that only need a gloss boost and light swirl removal, or maintenance details where time is limited. Use AIO Soft on softer paints and AIO Hard on harder paints, then top with a spray wax or quick detailer for extra beading.

How much compound should I put on the pad?

Prime a new pad with a little compound spread over the face, then use four or five pea sized dots for each section of about 50cm by 50cm. Too much product makes the pad slip, clog and leave more dust and residue. Clean the pad face with a brush or compressed air between sections and use ADBL Pad Cleaner to wash pads after the job.

Can ADBL Glass Polish remove scratches from a windscreen?

ADBL Glass Polish is a cerium oxide paste that removes light scratches, water stains, acid rain marks, wiper haze and old coatings from glass. It works by machine or by hand. It cannot safely remove deep scratches that catch a fingernail, which may need professional repair or a new windscreen. Clean the glass with a glass cleaner and towel afterwards.

ADBL cutting compounds, polishes and all in one products

The ADBL Compounds collection covers ADBL machine polishes for paint correction, from heavy cut to final finish. The ADBL Pro Line includes Cut Pro for heavy correction, One Cut Pro for cut and finish in a single step, Polish Pro for medium cut and Finish Pro for the final gloss. The range also includes Hard Cut, Super Polish and Perfect Finish, AIO Soft and AIO Hard all in one cleaner, glaze and sealants, and Glass Polish, a cerium oxide paste for glass.

Most come in 200mL and 1L bottles, are water based and free of silicone, and work with rotary and dual action machines on foam, microfibre or wool pads. Pair them with ADBL Roller pads and our edgeless microfibre for residue removal. Orders ship daily from Nerang, Queensland. Call 1800 016 006 for trade pricing.

Want custom branding?

Check out our custom branding form and submit your details and we will get in contact with you!

Back to top


Notification Channels