Skip to content

ADBL Polishing Pads

9 products

  • Save 15%

  • Save 15%

  • Save 15%

  • Save 15%

  • Save 15%

  • Save 15%

  • Save 24%

  • Save 33%

Showing 9 of 9

ADBL Polishing Pads · Help

Frequently asked questions

The questions we get asked the most about ADBL Polishing Pads.

Visit help centre
Which ADBL Roller pad grade should I use?

Use Hard Cut or Cut pads with a cutting compound for deep scratches, swirls and sanding marks. Use One Step for single stage correction with an all in one or medium polish. Use Polish or Soft Polish to refine haze after cutting, and Finish, the softest pad, with a finishing polish for maximum gloss. The pad name tells you its place in the process.

What size polishing pad fits my machine?

Match the pad to your backing plate. A 125mm pad suits a 125mm backing plate and is the most popular size for most panels. A 150mm pad suits a 150mm plate on a large throw machine for faster coverage of big panels, and a 75mm pad suits a 75mm plate for bumpers, pillars, mirrors and tight areas.

When should I use a microfibre or wool pad?

Microfibre and wool pads cut faster than foam. The ADBL Roller Pro Microfibre DA removes medium to deep defects and still finishes well on harder paints. The Roller Pro Wool DA uses short wool fibres for the strongest cut on deep scratches and sanding marks, and usually needs a foam polishing step afterwards to remove haze. Both work on dual action and rotary machines.

What is the ADBL EVO DA pad?

The ADBL EVO DA is a 125mm open cell foam pad that combines strong cutting with polishing. The open cell structure improves airflow and heat dispersion, so it keeps its cut during long sessions, and it removes sanding marks from P1500 grit. It works with any compound on a dual action polisher.

How many polishing pads do I need?

For a full correction on one car, most detailers use two to four pads of each grade, and swap to a clean pad when one becomes saturated with compound. This keeps cut consistent and lets each pad cool down. A good starter set is a cutting pad, a polishing pad and a finishing pad in your main size, plus a smaller size for tight areas.

How do I clean and store polishing pads?

Brush or blow out the pad face after every section. After the job, soak the pads in water with ADBL Pad Cleaner, work it through the foam or fibres, then rinse until the water runs clear. Squeeze out the water without wringing, dry them face down at room temperature and store them flat in a clean, dust free bag or box.

ADBL Roller polishing pads for dual action polishers

The ADBL Polishing Pads collection covers ADBL Roller pads for dual action polishers, sold in Australia by Microfibre World as the exclusive ADBL distributor. The Roller DA foam pads come in six grades, from Hard Cut, Cut and One Step to Polish, Soft Polish and Finish, in 75mm, 125mm and 150mm sizes. The range also includes the Roller Pro Microfibre DA and Roller Pro Wool DA pads for extra cut, which also work on rotary machines, and the EVO DA open cell foam pad for strong cutting with better cooling.

Prices start at $9.95 for 75mm pads, so detailers can keep a full set of grades in each size. Pair them with ADBL compounds and ADBL Pad Cleaner. Orders ship daily from Nerang, Queensland. Call 1800 016 006 for trade pricing.

Want custom branding?

Check out our custom branding form and submit your details and we will get in contact with you!

Back to top


Notification Channels