Skip to content

Polishing & Buffing

23 products

  • Save 53%

  • Save 39%

  • Save 70%

  • Save 62%

  • Save 37%

  • Save 61%

  • Save 53%

  • Save 35%

  • Save 8%

  • Sold Out

  • Save 45%

  • Save 79%

  • Sold Out

  • Sold Out

  • Save 69%

Showing 18 of 23

Polishing & Buffing · Help

Frequently asked questions

The questions we get asked the most about Polishing & Buffing.

Visit help centre
What is the best microfibre cloth for buffing a car?

For buffing paint, use a soft edgeless cloth. Our Korean edgeless terry buffing cloth is 300gsm but feels closer to 350gsm, and suits quick polish and wax removal. The Eclipse 400gsm dual pile cloth has a shorter pile side for cutting through polish and coating residue and a plush side for the final wipe. For heavier residue, the 480gsm orange edgeless cloth gives more cushion.

What is the difference between a polishing cloth and a buffing cloth?

The terms are often used interchangeably. In detailing, a polishing cloth usually means a cloth used to work a product onto a surface, and a buffing cloth is the soft cloth used to wipe off the residue and bring up the shine. For both jobs on paint, choose a clean, soft, edgeless microfibre cloth.

How do I buff off polish or wax without leaving marks?

Let the product haze as directed, then wipe with light pressure using a clean, folded edgeless cloth. Fold the cloth into quarters to get eight clean sections and turn to a fresh section as each one loads up. Finish with a light wipe using a fresh cloth. Heavy pressure and dirty or stitched-edge cloths are the most common causes of fine marring.

What GSM microfibre cloth should I use for polishing?

As a guide, 250gsm cloths suit wheels, door jambs, engine bays and interior wiping. 310 to 365gsm cloths suit general detailing and light polish removal. 400gsm and above, especially edgeless dual pile or plush cloths, suit paint, coating levelling and final buffing. Higher GSM gives more cushion, but the edge and pile type matter as much as the weight.

Which cloth should I use to remove ceramic coating residue?

Use a short pile, edgeless cloth in a light colour, so you can see the residue and avoid any colour transfer onto fresh coating. The Eclipse 400gsm dual pile cloth comes in ivory for this reason, and its laser-cut edge will not catch on trim or badges. Swap to a fresh cloth as soon as it starts to feel grabby.

Can I buy polishing and buffing cloths in bulk?

Yes. Polishing and buffing cloths come in bulk packs of 50, 100, 200 and 1,000, with pallet quantities on many lines and a lower price per cloth at higher quantities. Custom branding is available through the form on our site. Orders ship daily from Nerang, Queensland, with most arriving in 1 to 3 days to cities and 3 to 5 days to country areas.

Microfibre polishing and buffing cloths for detailing

The Polishing & Buffing collection brings together the cloths detailers use to remove polish, compound, wax, sealant and coating residue, along with the applicators and pads that go with them. It includes 250 to 365gsm microfibre cloths, large 40x70cm and 50x50cm cloths, Korean edgeless terry buffing cloths, the Eclipse 400gsm dual pile edgeless cloth, a 480gsm plush edgeless cloth, suede cloths, and polish and wax applicator pads.

Use a soft edgeless cloth on anything that touches paint, and keep lower GSM cloths for wheels, door jambs and interiors. Cloths are sold in bulk packs of 50, 100, 200 or 1,000 for detailers, workshops and resellers, and ship daily from Nerang, Queensland. Call 1800 016 006 for help choosing.

Want custom branding?

Check out our custom branding form and submit your details and we will get in contact with you!

Back to top


Notification Channels